The Barents Parka is the perfect jacket for everyday or urban winter use, especially here in the UK considering the rainfall.
Using an environmentally friendly fluorocarbon free Hydratic membrane, Fjallraven have provided a water and windproof barrier against the elements while still maintaining a casual look and a nice to the touch feel. On top of being extremely resistant to moisture and wind, the Barents is insulated with Supreme Microloft, a synthetic insulation which will still maintain its warmth even when wet.
A whole multitude of pockets are included, with two large bellows pockets with buttoned closures, two large chest pockets with zip closures and one napoleon pocket with a zip behind a protective flap. Inside is equipped with one small pocket with a zip and one large storage pocket for a phone, map or wallet. The hood fur is fully detachable and the relaxed fitting hood provides extra warmth and protection when the weather turns for the worst.
Not only does the Barents parka have a waterproof membrane, but it can also be waxed thanks to the use of Fjallraven's G-1000 and G-1000 HeavyDuty fabrics. Waxing the jacket will allow more moisture to escape as rain will start beading off the surface of the jacket rather than seeping through the outer fabric and getting trapped between the membrane and the G-1000.
The Barents Parka is a saviour for the British winter, at home in an urban frost filled town as much as dog walking in the countryside.
-
Waterproof, windproof
-
G-1000 original and HeavyDuty (can be waxed)
-
Synthetic Supreme Microloft insulation is warm when wet
-
Front closure with two way zip and press buttons
-
Large array of pockets
-
Fixed hood with removable fur lining
-
Two way hood adjustment
Care and maintenance
To keep your outdoor clothing and equipment in tip top condition and performing to its maximum we recommend the use of Nikwax products. We have been using Nikwax products since day one (26th March 1986) and have found them to be totally reliable, dependable and effective. Today’s Nikwax treatments contain environmentally friendly elastic water-repellent polymers that bond to fabric fibres, leaving the spaces between open and breathable. These stretchy polymers are able to stretch and move with the fabric so they stay put for longer and work better.
Nikwax treatments will not change the look or feel of the fabric and they are all water based, environmentally safe, non-flammable and contain no nasty Fluorocarbons. Nikwax products can be used to clean, re-proof and revitalise all your outdoor technical clothing and equipment.
Waterproof breathable clothing has a durable water-repellent (DWR) finish applied to the face fabric during the manufacturing process. The DWR forces water to bead up and roll off the surface therefore preventing the fabric from absorbing moisture. If the outside of your jacket is soaked in a layer of cold water, the warm damp air within can’t escape and will condense on the inside. This makes the jacket feel cold clammy and can make you think that it’s leaking. The DWR finish is not permanent and needs to be maintained and revitalised to optimise performance.
This three layer waterproof jacket should be cleaned regularly with Nikwax Tech Wash; I wash my jacket about once a month, or more often if it gets really filthy. Regular washing with Tech Wash will maintain the DWR for longer and remove salts and oils that can contaminate the fabric, and it will keep your lovely jacket clean and smelling fresh. Washing can be done in a machine according to the manufacturers care guidelines (on the internal label). First clean out any detergent and conditioner residue from the machine dispenser and then add the required amount of Tech Wash and away you go. Hand washing is also suitable but be sure to rinse the garment well.
When you notice that rain/water is no longer beading up and rolling off it’s time to re-proof. Nikwax TX Direct will re-instate a long lasting DWR to completely rejuvenate your jacket. Re-proofing can also be done in the machine once a garment has been washed. Just add the TX-Direct and use the same programme you used for washing. You can also use the spray-on product on a damp garment that has just been washed.
You wouldn’t buy a Ferrari and never have it serviced, so make sure you regularly wash and re-proof your quality kit.